What's New In The 3D Printer World

Sovol SV01 Rundown

     OK Scott Here again. So I over the last few years and all I have decided to change how I do my printer rundowns a little. Some might call them reviews but that’s a term I don’t care for because to many reviews are bias. Therefore I do what I call rundowns.  Where I give my overall thoughts on the printer along with a list of exactly what I found on the printers good and bad these are 100% my view of things I will give good and bad no matter what. So for this article I’m going to do a RUNDOWN  on the Sovol SV01 which I have had for just over 3 weeks now. You can find the unboxing and build video over on my youtube channel here.

Continue reading
  19564 Hits
  4 Comments
Tags:
Recent Comments
Scott Worthington
I use s3d I use priline or eryone filament most of the time with temps 208 to 213 on pla. One thing to keep in mind with this pri... Read More
Monday, 07 October 2019 09:06
Scott Worthington
I do not use cura. I use s3d
Sunday, 12 January 2020 20:11
19564 Hits
4 Comments

3D Printer Terms and Definitions

Ok Scott here again This time I'm going to start with another basics the parts and terms commonly used in 3D printers. I plan on adding images to most ares but until then I figured this will be a help for some of you. If you have more to add feel free to send me a message or email. I have not added printer layout types and not done delta terms yet but I will get there.

  1. Frame – Holds the full printer together. This can be metal, acrylic or even wood.
  2. X axis motion – movement on the printer from left to right.
  3. Y axis motion – movement on the printer from front to back.
  4. Z axis Motion – movement on the printer up and down.
  5. Extruder – Takes filament from the spool and pushes it to the hotend.
Continue reading
  14656 Hits
  5 Comments
Recent Comments
Brandon Stadthagen
Awesome read!! Keep it up, this should help clarify the parts for better troubleshooting!
Tuesday, 12 March 2019 22:46
Scott Worthington
Thanks just trying to help feel free to help me add more... already added a few more terms love seeing things like this increase b... Read More
Tuesday, 12 March 2019 22:50
Scott Worthington
I can add smoothers just need to figure out the best way to describe them because they are a mixed feedback item some swear by the... Read More
Wednesday, 13 March 2019 17:35
14656 Hits
5 Comments

Tuning and Speeding up Prints

     OK so Scott here again  and while I have been busy working on getting my new office / lab around I figured I would take a little time to put together a new short article based a few of my facebook post as a way to help the community tune their printers and speed up their prints. 

    one thing to remember is even if you have 2 printers brand new out of the box exact same make model everything both will need their own tune because of the variance in each part or piece in the printer. 

When it comes to tuning it should be the exact same steps to tune the X5S as an I3. 

Continue reading
  16617 Hits
  4 Comments
Recent Comments
Chris Whynot
Thanks Scott for your help.
Friday, 09 November 2018 20:42
Justin Drake
I hope you can find time to show pictures of this print and point out what settings in S3D to adjust any mishaps. Ie. bridging,und... Read More
Saturday, 01 June 2019 05:59
Scott Worthington
I dont plan on doing images or anything for this as the s3d site already has that stuff covered and the link is already in the art... Read More
Saturday, 01 June 2019 13:26
16617 Hits
4 Comments

Prevention is the key

Over the last few weeks there have been posts on social media relating to fires being caused by 3D printers.

Continue reading
  16190 Hits
  3 Comments
Recent Comments
Kevin West
As mention this is controversial, and think this is a preferential choice. I have never had any issues with tinning wires includin... Read More
Sunday, 05 August 2018 01:23
16190 Hits
3 Comments

Rundown on printers

      OK Scott here again like normal. A lot of people have asked me to do reviews or feedback on different printer or ask me what I think of a new printer out and while I can give my overall view of the new printers as to what I can see being good or bad about them I can not and will not do any true rundown on any printer or product I have not used. With that said I have offered my thoughts on several printers that I do not own but please always keep in mind it's only based on what I see....  while I have other printers I’m not going to include them here as one is no longer on the market and the other is custom built by me (still in process).

Continue reading
  21652 Hits
  0 Comments
21652 Hits
0 Comments

Scott's Printable Printer Upgrades List

    OK Scott Here again. I keep getting asked what parts I use on my printers so I figured I would build a list. starting with general parts. Now this list is just for the printers I have. I’ll also add notes about each as I build the list. Now this is by no means all the parts I have on my printers as some of them I don’t have links to some are prototypes of my own design and some I just didn’t think of it’s also not the only options for these designs as I’m sure most of them have copies or versions out that might work better for each person. I will try to update this as I find or design other parts. Or if you know of something worth adding to the list let me know.

Misc printer related items

Bowden tube cutter

I designed this after seeing a bunch of issues caused by Bowden tube not being cut straight

Bowden tube cutter

Continue reading
  21796 Hits
  2 Comments
Recent Comments
Steve Czerepak
Scott: I am having a problem with my X5S... I can run my X axis left and right with no problem.. ...... when I run my Y axis away... Read More
Wednesday, 13 November 2019 02:35
Scott Worthington
Sounds like I binding or rubbing issue
Wednesday, 13 November 2019 13:08
21796 Hits
2 Comments

Chitu G code Explained

        Once again Scott Here to see if I can’t help you understand the something else I have seen questions about in the 3D printing community.  This Time around I’ll go over the G-code used By Chitu on their F mini control board and other custom made control boards used by Tronxy and several other companies now. This control board comes on the Tronxy X5SA, X5ST, X5S-E2, XY-3 and XY-2 to name a few.
 
PLEASE NOTE CHANGING THESE SETTING WILL change your printers behavior. Therefore I do not recommend changing settings yourself without understanding what each setting your adjusting does.

Continue reading
  144163 Hits
  99 Comments
Tags:
Recent Comments
Scott Worthington
What you need to do to turn on heated bed is open notepad then type m8027 t1 M8500 Then save file to SD card. Then go to file ri... Read More
Friday, 27 April 2018 14:16
John Shummy
So unlike marlin you can upload seperate commands instead of the whole file?
Friday, 27 April 2018 20:22
Scott Worthington
Yes your uploading g code to change setting not complete firmware
Friday, 27 April 2018 20:23
144163 Hits
99 Comments

Tronxy X5S to X5SA Upgrade kit installation

          OK Scott Here again like normal. This time I had a little help from Norman Gilman with some pictures and a few of the steps, helping to get my mind in gear to write this. Now please note Neither Norman Or I installed these setup with the auto bed leveling because we use glass beds to thick for the factory blue sensor to see the bed through the glass.

Continue reading
  40545 Hits
  6 Comments
Recent Comments
Tony Nutt
great guide! how do you like the E3d mount you have in the picture? I am debating which one to do before I do my upgrade
Wednesday, 06 June 2018 14:41
Tony Nutt
So I completed the Upgrade last night I turned on the power had the touch screen was working well. turned it off and now i turn it... Read More
Sunday, 10 June 2018 17:14
Mike Bentley
ive only just installed this kit having putting it off for 6 months excellent no problems and its far better than the original dri... Read More
Wednesday, 13 March 2019 02:12
40545 Hits
6 Comments

Flashing Tronxy X5S Factory Control board USB Cable only

Ok so Scott here again, this time I decided to go ahead and take things to a simple level based off a write up done by Syed Muhammad Shaheryar. I have seen so many comments and issues with people flashing firmware to their factory TronXY X5S control board, now this should work for flashing the firmware on the X3S as well but the firmware I included will need some edit work unlike for the X5S. This Version of Arduino IDE will work just like any other but it can be installed on a thumb drive or SD card  and moved from one computer to the next without having to install anything on that computer. it should also work on other boards but I have not tested it.

Continue reading
  62430 Hits
  62 Comments
Recent Comments
Scott Worthington
By doing it this way You can copy the same file onto a thumb drive and run off ant windows computer. and use to flash other boards... Read More
Saturday, 24 February 2018 01:52
Scott Worthington
If you do not fallow it step by step this might happen. If you had arduino installed before you must remove it first as this versi... Read More
Tuesday, 06 March 2018 19:23
Scott Worthington
While I have seen this work on Windows 10 I have also seen it be an issue if you have another Windows 7 computer I would try that.... Read More
Tuesday, 06 March 2018 19:32
62430 Hits
62 Comments

Mk7 / Mk8 HOTEND ASSEMBELY REBUILD

      Ok so Scott here again lately I have been seeing a lot of post and comments about the factory Tronxy hotend so I figured I would go ahead and write up a quick tech article. While this is not the only way to rebuild or assemble the hotend assembly this is the way I do it. This also works on the E3D hotends I have but the throat is different on them. So let’s start with a few tools.

Continue reading
  32226 Hits
  4 Comments
Recent Comments
Scott Worthington
this part of the site does not have a upload options. the forum does.
Thursday, 15 February 2018 22:53
Scott Worthington
Normally I start out tightening it before it's cold then heat it up and check make sure it did not change.
Wednesday, 23 January 2019 20:01
32226 Hits
4 Comments

To keep the site live and make improvements Please consider Donating. Thank you for your donation.